peppers cable glands
877-966-2999
Time
peppers cable glands
peppers cable glands
peppers cable glands catalogue
peppers cable connectors
peppers cable glands uk
peppers cables
Including type Nos:
A C D P E *
          B
          S
          N
          A
ACDPE Series Breather Drain provides a method of effectively draining any moisture within an enclosure whilst allowing the air inside the enclosure to breathe with the surrounding atmosphere. ACDPE series breather drains maintain Increased Safety Exe method of explosion protection and IP66 for IEC type applications.
 
CERTIFICATION CENELEC
SIRA99ATEX3050U I M2 II 2DG EExe I/II; II 2DG E
Exe (Glass Filled Nylon and Aluminium)

CSA / A Ex
Class I, Zone 1, Exe II; Class I Division 2, Groups ABCD

GOST R-Exe II

POCC GB MΠ14.B00030

IECEx Ex e II

IECEx SIR 08.00244
APPLICATIONS Internal Dust Seal provides ingress protection to IP66 and 4x, with the largest possible pore size to aid draining, whilst retaining filtration capabilities that remove debris from the moisture and retains it on the surface where it can easily be removed with compressed air. Additionally the structural strength and chemical resistance characteristics of the material enable the filter to meet the requirements of hazardous area installations

Castellated Locknut allows moisture to pass between the locknut and the enclosure, draining via holes in the thread without any build up of moisture in the bottom of the enclosure

Captive O Ring Seal is located within a recess on the face of the breather drain again optimising ingress protection, ensuring the oring is not displaced during installation and helping protect the O ring from the environmental damage

External Drainage via two ports optimises ingress protection without compromising the draining capabilities
INGRESS
PROTECTION
IP66, CSA Enclosure Type 4x, NEMA 4x
IMPACT RESISTANCE 20Nm. (7Nm GF Nylon and Aluminium)
OPERATING TEMPERATURES -50C to +85C
MATERIALS
Brass CZ121 (ACDPEB)
316 Stainless Steel (ACDPES)
Aluminium Alloy (ACDPEA)
30% Glass Filled Nylon (ACDPEN)
VARIATIONS Clearance hole (10): 10mm length of thread, supplied complete with a castellated locknut and having 2 holes in the thread wall positioned directly opposite each other

Threaded Entry: 15mm length of thread, either supplied with or without castellated locknut and having 3 holes in the thread wall, offset to provide a 9mm range to accommodate differing wall thickness
THREADS ISO Metric; NPT; NPS; ISO Pipe Thread (BSP Taper, BSP Parallel); PG
SEALS The standard O Ring material is Nitrile
PLATING Zinc (ZP); Nickel (NP); Tin (TP); Electroless Nickel (EN)
EXAMPLE PART NUMBER Sample: ACDPEb/NP/M20/15
ACDPEb - Breather Drain type and material (Brass)
NP - Nickel plating
M20 - Male thread size
15 - Male thread length (15mm) and drain holes in thread (x 3 offset)
DIMENSIONS
Size Hex A/F Hex A/C Thread Length Head Length
M20 - 1.2h NPT 28.6mm 32.9mm 10 (2 Hole) or 15 (3 Hole) 15mm
M25 - 3.4hNPT 34.9mm 40.2mm
All Dimensions are in Millimetres
NOTES:
  • 30% glass filled nylon variations are only available with 15mm length of thread version and are supplied with or without a brass castellated nut
  • Installation instructions are supplied with the breather drain, the instructions must be read prior to installation and adhered to in full
  • Unless otherwise stated ISO Metric entry threads have a 1.5mm pitch
  • Where metallic breather drains are fitted into non-metallic Increased Safety Exe enclosures they must be included within the earth circuit of the system

 

Peppers America, Inc
875 Via De La Paz, Suite D
Pacific Palisades, CA 90272
310-459-1605
Part of the North American Sales Company